User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            Transmation 1040 Verification (1 year) w/Ronan X86
DATE:                  29-Nov-94
AUTHOR:                User Contributed
REVISION:              1.0
ADJUSTMENT THRESHOLD:  50%
NUMBER OF TESTS:       32
NUMBER OF LINES:       178
CONFIGURATION:         Fluke 5700A
STANDARD:              X86
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
# Source: Transmation 1040/1040SP Instruction Manual (I.S. No. 100724-905)
# The 90 day specifications of the 5700A are used in TUR computations.
  1.001  STD          X86
  1.002  ASK-   R                    P                            F        W
  1.003  ASK+     D   N K                S U       M C               L
  1.004  MMFC                                                              C2
  1.005  HEAD         EQUIPMENT SETUP
  1.006  DISP         [32]                   [27][91]1m[27][91]5mWARNING
  1.006  DISP         HIGH VOLTAGE is used or exposed during the performance
  1.006  DISP         of this calibration. DEATH ON CONTACT may result if
  1.006  DISP         personnel fail to observe safety precautions.
  1.007  DISP         Ambient temperature: 18C - 28C.
  1.007  DISP         Relative humidity: less than 80%.
  1.007  DISP         Allow the UUT to stabilize.
  1.008  DISP         Lift the toggle switch and raise it to test the battery.
  1.009  EVAL   Did the battery check out at greater than 4.7 Volts?
  2.001  DISP         [32] Connect the [27][91]5m5700A[27][91]0m and the UUT.
  2.001  DISP         [32][27][91]1m        5700A        TO  Transmation 1040
  2.001  DISP         [32]    OUTPUT V ê A HI ÄÄÄÄÄÄÄÄÄ V.IN/OUT +
  2.001  DISP         [32]    OUTPUT V ê A LO ÄÄÄÄÄÄÄÄÄ V.IN/OUT -
  2.001  DISP         [32]    AUX CURRENT OUTPUT ÄÄÄÄÄÄ mA IN +
  2.002  HEAD         {DC VOLTAGE TEST}
  2.003  DISP         Turn on the Transmation.
  2.004  DISP         Select 0-11V IN on the Transmation.
  2.005  HEAD         DC VOLTAGE MEASUREMENT TEST: {0-11V Range}
  2.006  5700   11    0.000V         0.03% 0.04/                           2W
#!          Test Tol 0.0044, Sys Tol 7.5e-007, TUR 5866.667 (>= 4.00).
  3.001  5700   11    2.000V         0.03% 0.04/                           2W
#!          Test Tol 0.005, Sys Tol 1.32e-005, TUR 378.788 (>= 4.00).
  4.001  5700   11    5.000V         0.03% 0.04/                           2W
#!          Test Tol 0.0059, Sys Tol 2.9e-005, TUR 203.448 (>= 4.00).
  5.001  5700   11    7.000V         0.03% 0.04/                           2W
#!          Test Tol 0.0065, Sys Tol 3.9e-005, TUR 166.667 (>= 4.00).
  6.001  5700   11    10.000V        0.03% 0.04/                           2W
#!          Test Tol 0.0074, Sys Tol 5.4e-005, TUR 137.037 (>= 4.00).
  7.001  HEAD         {DC MILLIVOLTAGE TEST}
  7.002  DISP         Select 0-110mV IN on the Transmation.
  7.003  HEAD         DC VOLTAGE MEASUREMENT TEST: {0-110mV Range}
  7.004  5700   110   0.00mV         0.06% 0.06/                           2W
#!          Test Tol 6.6e-005, Sys Tol 7.5e-007, TUR 88.000 (>= 4.00).
  8.001  5700   110   20.00mV        0.06% 0.06/                           2W
#!          Test Tol 7.8e-005, Sys Tol 8.9e-007, TUR 87.640 (>= 4.00).
  9.001  5700   110   50.00mV        0.06% 0.06/                           2W
#!          Test Tol 9.6e-005, Sys Tol 1.1e-006, TUR 87.273 (>= 4.00).
 10.001  5700   110   70.00mV        0.06% 0.06/                           2W
#!          Test Tol 0.000108, Sys Tol 1.24e-006, TUR 87.097 (>= 4.00).
 11.001  5700   110   100.00mV       0.06% 0.06/                           2W
#!          Test Tol 0.000126, Sys Tol 1.45e-006, TUR 86.897 (>= 4.00).
 12.001  HEAD         {DC CURRENT TESTS}
 12.002  DISP         Select mA IN on the Transmation
 12.003  HEAD         DC CURRENT TESTS: {0-50mA Range}
 12.004  5700   50    0.00mA         0.06% 0.12/                           2W
#!          Test Tol 6e-005, Sys Tol 1e-008, TUR 6000.000 (>= 4.00).
 13.001  5700   50    4.00mA         0.06% 0.12/                           2W
#!          Test Tol 6.24e-005, Sys Tol 3e-007, TUR 208.000 (>= 4.00).
 14.001  5700   50    12.00mA        0.06% 0.12/                           2W
#!          Test Tol 6.72e-005, Sys Tol 7e-007, TUR 96.000 (>= 4.00).
 15.001  5700   50    20.00mA        0.06% 0.12/                           2W
#!          Test Tol 7.2e-005, Sys Tol 1.1e-006, TUR 65.455 (>= 4.00).
 16.001  5700   50    50.00mA        0.06% 0.06/                           2W
#!          Test Tol 6e-005, Sys Tol 4e-006, TUR 15.000 (>= 4.00).
 17.001  HEAD         {DC VOLTAGE OUTPUT TESTS}
 17.002  DISP         [32] Connect the [27][91]5mRONAN[27][91]0m and the UUT.
 17.002  DISP         [32][27][91]1m        RONAN        TO  Transmation 1040
 17.002  DISP         [32]    INPUT V +       ÄÄÄÄÄÄÄÄÄ V.IN/OUT +
 17.002  DISP         [32]    INPUT V -       ÄÄÄÄÄÄÄÄÄ V.IN/OUT -
 17.003  DISP         Turn on the Ronan.
 17.004  DISP         Select the 10V range on the Ronan.
 17.005  DISP         Select 0 - 11V OUT on the Transmation.
 17.006  HEAD         DC VOLTAGE OUTPUT TEST: {0-11V Range}
 17.007  DISP         Dial in zero volts on the Transmation.
 17.008  MEMI         Enter the reading from the lefthand Ronan display.
 17.009  ACC    10    0.000V         0.02% 0.01/
 17.010  MEMC   11    V              0.03% 0.04/
#!          Test Tol 0.0044, Sys Tol 0.001, TUR 4.400 (>= 4.00).
 18.001  DISP         Dial in 2 volts on the Transmation.
 18.002  MEMI         Enter the reading from the lefthand Ronan display.
 18.003  ACC    10    2.000V         0.02% 0.01/
 18.004  MEMC   11    V              0.03% 0.04/
#! WARNING: Test Tol 0.005, Sys Tol 0.0014, TUR 3.571 (<  4.00).
 19.001  DISP         Dial in 5 volts on the Transmation.
 19.002  MEMI         Enter the reading from the lefthand Ronan display.
 19.003  ACC    10    5.000V         0.02% 0.01/
 19.004  MEMC   11    V              0.03% 0.04/
#! WARNING: Test Tol 0.0059, Sys Tol 0.002, TUR 2.950 (<  4.00).
 20.001  DISP         Dial in 7 volts on the Transmation.
 20.002  MEMI         Enter the reading from the lefthand Ronan display.
 20.003  ACC    10    7.000V         0.02% 0.01/
 20.004  MEMC   11    V              0.03% 0.04/
#! WARNING: Test Tol 0.0065, Sys Tol 0.0024, TUR 2.708 (<  4.00).
 21.001  DISP         Dial in 10 volts on the Transmation.
 21.002  MEMI         Enter the reading from the lefthand Ronan display.
 21.003  ACC    10    10.000V        0.02% 0.01/
 21.004  MEMC   11    V              0.03% 0.04/
#! WARNING: Test Tol 0.0074, Sys Tol 0.003, TUR 2.467 (<  4.00).
 22.001  DISP         Select the 100mV range on the Ronan.
 22.002  DISP         Select 0 - 110mV OUT on the Transmation.
 22.003  HEAD         DC VOLTAGE OUTPUT TEST: {0-110mV Range}
 22.004  DISP         Dial in zero volts on the Transmation.
 22.005  MEMI         Enter the reading from the lefthand Ronan display.
 22.006  ACC    100   0.000mV        0.02% 0.01/
 22.007  MEMC   110   mV             0.06% 0.06/
#!          Test Tol 0.066, Sys Tol 0.01, TUR 6.600 (>= 4.00).
 23.001  DISP         Dial in 20 millivolts on the Transmation.
 23.002  MEMI         Enter the reading from the lefthand Ronan display.
 23.003  ACC    100   20.00mV        0.02% 0.01/
 23.004  MEMC   110   mV             0.06% 0.06/
#!          Test Tol 0.078, Sys Tol 0.014, TUR 5.571 (>= 4.00).
 24.001  DISP         Dial in 50 millivolts on the Transmation.
 24.002  MEMI         Enter the reading from the lefthand Ronan display.
 24.003  ACC    100   50.00mV        0.02% 0.01/
 24.004  MEMC   110   mV             0.06% 0.06/
#!          Test Tol 0.096, Sys Tol 0.02, TUR 4.800 (>= 4.00).
 25.001  DISP         Dial in 70 millivolts on the Transmation.
 25.002  MEMI         Enter the reading from the lefthand Ronan display.
 25.003  ACC    100   70.00mV        0.02% 0.01/
 25.004  MEMC   110   mV             0.06% 0.06/
#!          Test Tol 0.108, Sys Tol 0.024, TUR 4.500 (>= 4.00).
 26.001  DISP         Dial in 100 millivolts on the Transmation.
 26.002  MEMI         Enter the reading from the lefthand Ronan display.
 26.003  ACC    100   100.00mV       0.02% 0.01/
 26.004  MEMC   110   mV             0.06% 0.06/
#!          Test Tol 0.126, Sys Tol 0.03, TUR 4.200 (>= 4.00).
 27.001  HEAD         {DC CURRENT OUTPUT TESTS}
 27.002  DISP         [32] Connect the [27][91]5mRONAN[27][91]0m and the UUT.
 27.002  DISP         [32][27][91]1m        RONAN        TO  Transmation 1040
 27.002  DISP         [32]    INPUT mA+       ÄÄÄÄÄÄÄÄÄ mA OUT+
 27.002  DISP         [32]    INPUT mA-       ÄÄÄÄÄÄÄÄÄ mA OUT-
 27.003  DISP         Select the 100 mA range on the Ronan.
 27.004  DISP         Select mA OUT on the Transmation.
 27.005  HEAD         DC CURRENT OUTPUT TEST: {0-50mA Range}
 27.006  DISP         Dial in zero mA on the Transmation.
 27.007  MEMI         Enter the reading from the lefthand Ronan display.
 27.008  ACC    100   0.000mA        0.03% 0.01/
 27.009  MEMC   50    mA             0.06% 0.12/
#!          Test Tol 0.06, Sys Tol 0.01, TUR 6.000 (>= 4.00).
 28.001  DISP         Dial in 4 mA on the Transmation.
 28.002  MEMI         Enter the reading from the lefthand Ronan display.
 28.003  ACC    100   4.000mA        0.03% 0.01/
 28.004  MEMC   50    mA             0.06% 0.12/
#!          Test Tol 0.0624, Sys Tol 0.0112, TUR 5.571 (>= 4.00).
 29.001  DISP         Dial in 12 mA on the Transmation.
 29.002  MEMI         Enter the reading from the lefthand Ronan display.
 29.003  ACC    100   12.000mA       0.03% 0.01/
 29.004  MEMC   50    mA             0.06% 0.12/
#!          Test Tol 0.0672, Sys Tol 0.0136, TUR 4.941 (>= 4.00).
 30.001  DISP         Dial in 20 mA on the Transmation
 30.002  MEMI         Enter the reading from the lefthand Ronan display.
 30.003  ACC    100   20.000mA       0.03% 0.01/
 30.004  MEMC   50    mA             0.06% 0.12/
#!          Test Tol 0.072, Sys Tol 0.016, TUR 4.500 (>= 4.00).
 31.001  DISP         Dial in 50 mA on the Transmation.
 31.002  MEMI         Enter the reading from the lefthand Ronan display.
 31.003  ACC    100   50.000mA       0.03% 0.01/
 31.004  MEMC   50    mA             0.06% 0.06/
#! WARNING: Test Tol 0.06, Sys Tol 0.025, TUR 2.400 (<  4.00).
 32.001  DISP         Turn off the Transmation.
 32.002  DISP         Turn off the Ronan.
 32.003  HEAD
 32.004  END
#! T.U.R.s less than 4.00:                  5
#! T.U.R.s estimated using RANGE value:     0
#! T.U.R.s not calculated (ASK- U):         0
#! T.U.R.s not computable at compile time:  0
#! FOR JUSTIFICATION REFER TO COMMENTS FOLLOWING EACH TEST IN THIS LISTING.